manualshive.com logo in svg

CSZ EZT-550, Instruction Manual, Page: 19 / 69

Share
Download
CSZ EZT-550 Instruction Manual Download Page 19

EZT-550 Controller Manual

 

   

18

2)  From the Edit menu, select New Profile and select “Yes” to create a new profile. 

Edit Menu Options 

New Profile: 

Clears any existing profile entry data so that a new profile can be entered. 

Insert Step: 

Inserts a step into the current profile at the current step number. 

Delete Step: 

Deletes the current step. 

Copy Step: 

Copies the current step data. 

Paste Step: 

Pastes previously copied step data to current step. 

Select Profile: 

Opens the file explorer window so that the user can select a profile from the currently 
saved profiles. 

Save Profile: 

Saves any changes made to the current profile under the existing name.  If no name 
exists, the user is prompted to enter one. 

Save As: 

Allows the user to save the current profile to a different name.  This is useful for 
copying profiles in order to make different versions of the same profile. 

Delete Profile: 

Allows the user to delete the current profile. 

Step Scroll Buttons 

 

 

 

Moves the display back to the previous step. 

Moves the display to the next step. 

Summary of Contents for EZT-550






































































Reviews:

No comments