SIGNATURE 2 SERIES
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will
cause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that
Dow Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound
is used in the manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon® tape be used to seal plastic Noryl® threaded fittings.
Specifications
3
General Specifications
TN15-S2
MN15-S2
TN25-S2
MN25-S2
Grains Capacity / Regeneration
15,000
25,000
Salt Used / Regeneration
18.0
30.0
Maximum Raw Water Nitrate / Sulfate (mg/l)
100
100
Maximum Clear Iron / Manganese (ppm)
0
0
Exchange Resin (cu ft)
1.5
2.5
Mineral Tank (Vortech ™)
10 x 54
13 x 54
Brine Tank (polyethylene with grid & safety)
18 x 33
18 x 33
Service Flow Rate (gpm)*
5.0
8.0
Backwash Flow Rate ((gpm)
1.2
2.4
Gallons Used / Regeneration
60
80
Space Required
18 x 28 x 62
18 x 31 x 62
Approximate Shipping Weight (lbs)
133
251