CSI MN15-S2 Installation And Operating Manual Download Page 23

 

                                                                                                                

                       

 

            

SIGNATURE  2  SERIES                                                                                        

WATER TREATMENT EQUIPMENT

This warranty cannot be transferred - it is extended only to the original 
purchaser  or first user of the product. by accepting and keeping this 
product, you agree to all of the warranty terms and limitations of liability 
described below.

Important  Warning: Read carefully the CSI Water Treatment Systems 
Equipment Installation, Operating and Maintenance Instructions Manual 
to avoid serious personal injury and property HAZARDS and to ensure 
safe and proper care of this product.

Model Numbers Covered:
Water Softeners, Media Filters and Upflow Filters

*FOR AS LONG AS YOU OWN AND LIVE IN YOUR SINGLE FAMILY 
HOME, this warranty covers your water treatment equipment, if you are 
the first user of this CSI Water Treatment Systems equipment and pur-
chased it for single family home use - subject to all of the conditions, lim-
itations and exclusions listed below. Purchasers who buy the CSI Water 
Treatment Systems equipment for other purposes, and other component 
parts are subject to more limited warranties and you should read all of the 
terms included in this form to make sure you understand your warranty.

What is covered by this warranty?
CSI Water Treatment Systems warrants that at the time of manufacture, 
the water treatment equipment shall be free from defects in material and 
workmanship as follows :

Product

Warranty

Residential Mineral Tank

10 Years

Proprietary Control Valves

7 Years

Other Softener / Filter Control Valves

5 Years

Brine Tank

5 Years

Residential Reverse Osmosis System

5 Years

Other Accessoreis and Parts

1 Year

Brine Tank Compoents

1 Year

REVERE Wireless Low Salt Alarm

90 Days

* This warranty does not include media and/or cartridge filter elements. 

Additional Terms & Conditions
What CSI Water Treatment Systems will do if you have a covered 
warranty claim CSI will at its option either make repairs to correct any 
defect in material or workmanship or supply and ship either new or used 
replacement parts or products. CSI will not accept any claims for labor or 
other costs.

Additional Exclusions and Limitations
This  warranty is non-transferable and does not cover any failure or prob-
lem unless it was caused solely by a defect in material or workmanship. 
In addition, this warranty shall not apply :

•  If  the water treatment equipment is not correctly installed, operated, 

repaired and maintained as described in the Installation, Operating & 
Maintenance Instructions Manual provided with the product.

•  Defects caused as a direct result of the incoming water quality

•  If the tank is not the size indicated for the supply line size of the instal-

lation, as described in the manual.

• 

To any failure or malfunction resulting from abuse (including freezing), 
improper or negligent; handling, shipping (

by 

anyone 

•  If the unit has not always been operated within the factory calibrated 

temperature limits, and at a water pressure not exceeding 125 psi oth-
er than CSI), storage, use, operation, accident; or alteration, lightning, 
flooding or other environmental conditions;

•   To any failure or malfunction resulting from failure to keep the     unit 

full of potable water, free to circulate at all times; and with the tank 
free of damaging water sediment or scale deposits;

•  This warranty does not cover labor costs, shipping charges, service 

charges, delivery expenses, property damage, administrative fees or 
any costs incurred by the purchaser in removing or reinstalling the 
water treatment equipment.

•  The warranty does not cover any claims submitted to CSI more than 

30 days after expiration of the applicable warranty, and does not 
apply unless prompt notice of any claim is given to an authorized CSI 
Dealer or to CSI or a designated contractor is provided access to the 
installation and to the water treatment equipment.

THESE WARRANTIES ARE GIVEN IN LIEU OF ALL OTHER EXPRESS 
WARRANTIES. NO CSI REPRESENTATIVE OR ANY OTHER PARTY 
IS AUTHORIZED TO MAKE ANY WARRANTY OTHER THAN THOSE 
EXPRESSLY CONTAINED IN THIS WARRANTY AGREEMENT.

Additional Warranty Limitations
ANY IMPLIED WARRANTIES THE PURCHASER MAY HAVE, IN-
CLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BE-
YOND THE APPLICABLE TIME PERIODS SPECIFIED ABOVE. Some 
states do not allow limitations on how long an implied warranty lasts, so 
the above limitations may not apply to you.

Limitations of Remedies
The remedies contained in this warranty are the purchaser’s exclusive 
remedies. In no circumstances will CSI or the seller of the product be 
liable for more than, and purchaser-user’s remedies shall not exceed, 
the price paid for the product. In no case shall CSI or seller be liable for 
any special, incidental, contingent or consequential damages. Special, 
incidental, contingent and consequential damages for which CSI is not 
liable include, but  are not limited to, inconvenience, loss or damage to 
property, consequential mold damage, loss of profits, loss of savings 
or revenue, loss of use of the products or any associated equipment, 
facilities, buildings or services, downtime, and the claims of third parties 
including customers. Some states do not allow the exclusion or the limita-
tion of incidental or consequential damages, so the above limitations or 
exclusion may not apply to you.

What to do if you have a problem covered by this warranty
Any warranty coverage must be authorized by CSI. Contact the person 
from whom you purchased the product, who must receive authorization 
from a CSI Dealer .

If your product is new and not used and you wish to return it, contact your 
CSI Dealer.                               
 

Summary of Contents for MN15-S2

























Reviews: