CSI Wireless SBX-3, Reference Manual

Page: 80 / 110

SBX-3 Reference Manual
62
This command may be issued through either serial port with the same
result. The command has the following form:
$PCSI,4<CR><LF>
Response:
$PCSI,ACK,4<CR><LF>
When this command has been issued in Manual Tune mode, the
receiver will initiate a new Global Search when commanded to
Automatic Tune mode. If the receiver is operating in its Automatic
Background Search mode, a new Global Search will begin immediately.
5.6.2.2 Baud Rate Change Command ($PCSI,5)
This proprietary $PCSI command instructs the SBX-3 primary and
secondary communications ports to specified baud rates.
$PCSI,5,rP0,rP1<CR><LF>
Response:
$PCSI,ACK,5,rP0,rP1<CR><CL>
In this message, rP0 designates the SBX-3 main serial port baud rate
and rP1 designates the SBX-3 secondary serial port baud rate. Select
your desired baud rate according to the supported rates shown in Table
5-3:
Table 5-3 SBX-3 Baud Rates
rP0 and rP1
2400
4800
9600
You may issue the baud rate command through either serial port.
Please note that if you wish to have the rate of the opposite port
changed, without changing the rate of the serial port through which the