GPSteer Quick Reference Guide
Part Number: 875-0140-000
Quick Start
Note
: In Contour guidance, make sure spray is ON when setting A and B points. To switch from Contour
to
Straight guidance, press the
key at any time while in Run mode.
How to: Using GPSteer
1.
Turn on power. You will see the
start-up screen.
Satloc GPSteer V.1.0
Lightbar: None
Steering: GPSteer
GPS: Wait
MemRemain: 25.84 hours
Swath Width: 20.00 feet
2.
The default swath width is 20 feet.
To select a different swath width:
a.
Press
to access the
main menu.
Straight 000
0.00
Menu
New AB Line
Contour Mode
Next Field
Swath Setup
System
Status Disp
b.
Select
Swath Setup
. To
select a new swath width,
press
at the
Swath Width
field.
Swath Setup Menu
Swath Width: 20.0 feet
Sensitivity: 5
Steer Type: Skew
Tip! To change the units, select
System
from the main menu.
c.
Use the rotary dial to scroll
through 1-9 for each digit.
Press
to advance
to the next number. To save
your settings and return to
Run mode, press
.
3.
Wait until you have GPS lock – the
screen will show
GPS: OK
when
you have a position lock and prompt
you to press your A point.
Straight 000
0.00
Apply: Off
GPS:OK
Steer: On
Type: Skew
Ready for A
