PROCEDURE TO USE 2.0 OPERATING SYSTEM WITH THE CSA-MMR
T h e C S A M e g a - M i d g e t R a c e r ™ a c c e l e r a t o r u t i l i z e s C B M ’ s 2 . 0
O p e r a t i n g S y s t e m i n m u c h t h e s a m e w a y t h a t i t u s e s t h e e a r l i e r 1 . 3
Operating System. Both operating systems are fully compatible with the
a c c e l e r a t o r w h e n t h e p r o p e r j u m p e r s e t t i n g s a r e u s e d a n d t h e A m i g a
s y s t e m i s i n s t r u c t e d t o p r o p e r l y u t i l i z e t h e 3 2 - b i t S R A M a r e a w h e n
installed on the accelerator.
To use CBM’s 2.0 ROM with 32-bit SRAM:
1)
Install the 2.0 ROM on the Amiga motherboard by
carefully following the procedure included with the
Commodore ROM upgrade kit.
2)
Place a jumper on the 512KB jumper block
W3
.
3)
Delete SRAM from the installation sequence.
4)
Check proper operation of the accelerator using the CSA
analyzer appropriate for your accelerator configuration.