18
CHARGING NIMH/NICD BATTERY IN RE-PEAK CHARGE MODE
Re-peak Charge Mode (NiMH and NiCD batteries only): In re-peak charge mode,
the charger can peak charge the battery once, twice or three times in a row auto-
matically. This is good for confirming the battery is fully charged, and for checking
how well the battery receives fast charges. A five minute cool-off delay occurs after
each re-peak charge. Press START/ENTER button more than 3 seconds to start the
charging.
Re-peak cycle number 1 shows on the display.
Press the START/ENTER button to make the re-
peak cycle number blink and press INC. or DEC.
button to find the desired number of times to re-peak
charge the battery. Press the START/ENTER button
to confirm selection.
DISCHARGING OF NIMH/NICD BATTERY
Set discharge current on the left and final volt
-
age on the right.
Range of the discharge current is 0.1-2.0A;
range of final voltage is 0.1-25.2V. Press
START/ENTER button for more than
3 seconds to start the program.
The screen indicates the discharging state. you
can press START/ENTER button to alter dis-
charge current, Press START/ ENTER button
again to store the value, Press BATT TYPE/
STOP button to stop discharging. The emitted
sound alerts the end of discharging.
Start
Enter
DEC. INC.
N i M H R E - P E A K
1
N i M H 2 . 0 A 9 . 5 9 V
R P C 0 0 0 : 3 3 0 0 0 1 7
- +
Battery
type
Charge
current
Battery
voltage
Elapsed
time
Charged
capacity
Start
Enter
Batt type
Stop
>3 seconds
DEC. INC.
NiMH DISCHARGE
0.1A CUT:1.0V
Battery
type
- +
Discharge
current
Battery
type
Battery
voltage
Elapsed
time
Discharged
capacity
NiMH 0.1A 7.42V
DSC 022:45 00890