9
6. LITHIUM BATTERY CONNECTION DIAGRAM
Space X1 Turbo comes with the built in switching power supply.
You can connect the AC power cord directly to the main AC socket. (100-240V AC).
For attaching directly to 12V car batteries. It is particularly important that you use a
fully charged 13.8V car battery.
CONNECTING THE BATTERY
Before connecting a battery it is absolutely essential to check one last time that you
have set the parameters correctly. If the settings are incorrect, the battery may be
damaged, and could even burst into flames or explode. To avoid short circuits be
-
tween the banana plugs, always connect the charge leads to the charger first, and
only then to the battery. Reverse the sequence when disconnecting the pack.
Balance socket:
The balance wire attached to the battery must be connected to the charger with the
black wire aligned with the negative marking. Take care to maintain correct polarity!
(See the wiring diagram below.)
This diagram shows the correct way to connect your battery to the Space X1 Turbo
while charging in the balance charge program mode only.
WARNING:
Failure to connect as shown in this diagram will damage this charger.