17
10. NIMH/NICD BATTERY PROGRAM
CHARGING OF NIMH/NICD BATTERY
This program is for charging and discharging of
NiMH/NiCD batteries associated with R/C models
applications. You can press START/ ENTER button
to change the parameter value, press START/EN-
TER button again to store the value.
The screen displays the real-time discharging
status. Press BATT TYPE/STOP button to stop the
process. The audible sound indicate the end of
process.
CHARGING NIMH/NICD BATTERY IN THE AUTO CHARGE MODE
In this program the charger detects the condition of the battery which is connected
to the output and automatically charges the battery. In this mode, you should set up
the upper limit of the charge current to avoid damage by excessive feeding current.
Some batteries of low resistance and capacity can lead to higher current in the auto
charging mode.
The program is for charging of NiMH/NiCD batteries
in auto mode.
You can make it blink in the current field and press
INC. or DEC. at the same time to switch mode.
The screen displays real-time discharging status.
Press BATT TYPE/STOP button to stop the pro-
cess.
The audible sound indicates the end of process.
Start
Enter
Batt type
Stop
>3 seconds
DEC. INC.
NiMH CHARGE
CURRENT 2.0A
Battery
type
- +
Elapsed
time
Charged
capacity
Battery
type
Charge
current
Battery
voltage
Start
Enter
Batt type
Stop
>3 seconds
N i M H A u t o C H A R G E
C U R R E N T 2 . 0 A
Battery
type
N i M H 2 . 0 A 9 . 5 2 V
A U T 0 0 0 : 1 3 0 0 0 0 0
Elapsed
time
Charge
capacit
Battery
type
Charge
current
Battery
voltage