Crystal Vision
Appendix 1
13 Appendix 1
Statesman Control
Statesman software control of Safire 3 is no longer supported. The following is
included for users of Statesman up to v 4.51.
The Crystal Vision Statesman PC control software is designed to control a range of
Crystal Vision modules via Ethernet control from a PC. Statesman provides a user
friendly means of configuring and operating Crystal Vision modules with the benefit of
“see-at-a-glance” status monitoring.
The main Statesman application communicates with each module in a frame through
a Statesman-capable front panel CPU or full active control panel. Either of these must
be fitted to the frame to allow Statesman control.
Statesman operation
The initial view will show an Explorer style view of the connected frames and
modules. Double clicking on a module will enable the display of the main application
menus.
The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower pane or drag the
button to vary the size of the panes.
Safire 3 User Manual R1.3
75
24 March 2017
