Crystal Vision
Hardware installation
Link configurations
Link
Towards front of board
Towards rear of board
PL2
CVBS / Y / G output
High/Standard Definition serial digital
output
PL3
CVBS / U / B / YC-Y output
High/Standard Definition serial digital
output
PL4
CVBS / V / R / YC-C output
High/Standard Definition serial digital
output
Note:
Analogue video output formats are selected via the board edge or
remotely. When the Y/C output format is selected the third output will
give CVBS.
Engineering link and LEDs
PL10 sets the Q-Down 3G range IP address to default (10.0.0.201) or to a user
selected IP address. The LEDs LED1, LED2 and LED3 are included for diagnostic
purposes and are not visible from the front of the frame.
Link
Towards front of board
Towards the rear of board
PL10
Default IP address 10.0.0.201
Custom set IP address
LED
Illuminated
Not Illuminated
LED1
Input equaliser locked to valid
input
No input or invalid input
LED2
Data
LED3
Link
Potentiometers
These potentiometers have been factory set and should not require further
adjustment.
Q-Down-AG 3G/ATG 3G User Manual R2.1
7
11 July 2019
