RS363S15FM Rugged Server User Guide
RS363S15FM User Guide
Page
22
of
32
MEMORY REMOVAL AND REPLACEMENT
Removing and Replacing the Memory
Contact Crystal
Technical Support
before performing a memory upgrade. Use only
Crystal- approved memory for upgrades.
Do not force the DIMM. Forcing the DIMM may result in equipment damage. Check the
alignment and keying before installing.
For population order see the motherboard manual received or contact
Technical Support
.
Steps:
1.
Open up chassis cover (see
Removing the Cover
in the Chassis Access section on page
15).
2.
If removal is required, locate the memory card area and open both DIMM release levers
by placing one finger on each lever and pushing outward. See
Figure 7
on next page.
3.
The DIMM will lightly pop out of the slot. Remove the old DIMM.
4.
Check the orientation or key when adding new DIMM.
5.
Press the DIMM into its slot evenly on both ends until it clicks into place. The DIMM
release levers will snap into place.
6.
The DIMM is properly seated when the release levers have fully engaged.
Summary of Contents for RS363S15FM
Page 2: ......
Page 35: ...RS363S15FM Rugged Server User Guide RS363S15FM User Guide Page 33 of 32...
Page 36: ......