RS363S15FM Rugged Server User Guide
RS363S15FM User Guide
Page
19
of
32
EXPANSION/RISER CARD REMOVAL AND REPLACEMENT
Installing a plug-in expansion card requires an appropriate riser card. Contact a Crystal Sales
Representative or Technical Support if the system does not include a riser card.
Removing and Replacing the Plug-in Expansion/Riser Card
Disconnect power source to prevent injury.
Installing a plug-in expansion/riser card requires opening the (product) cover; removing
the card cage; inserting the card into the motherboard; replacing the card cage; and
disconnecting and reconnecting the appropriate connectors.
Do not force the card. Forcing the card may result in equipment damage. If it does not
slide into place, check the alignment and try again.
Please reference
Figure 5
on the next page.
Steps:
1.
Turn the unit OFF and disconnect the unit from the power source.
2.
Remove the chassis cover (see
Removing the Cover
on page 15).
3.
Remove the corresponding expansion slot filler bracket if installed or remove card.
4.
Align the expansion card with the appropriate slot and press the expansion card in
firmly.
5.
With the expansion card in place within the slot, install the screw and tighten to hold
the card in place.
6.
Attach appropriate connectors.
7.
Replace chassis cover
.
Summary of Contents for RS363S15FM
Page 2: ......
Page 35: ...RS363S15FM Rugged Server User Guide RS363S15FM User Guide Page 33 of 32...
Page 36: ......