RS363S15FM Rugged Server User Guide
RS363S15FM User Guide
Page
12
of
32
Using Jonathan Rails
To install RS363S15FM with Jonathan Rails in an equipment rack, complete the following
steps below and see
Figure 3
on the following page.
1.
Attach a bracket (see #6 in Figure 3) to the smooth side of the Jonathan rail that has
four or more holes in a row (see #9 in Figure 3). There are five slots on each bracket;
when attaching to the rail side with the row of holes, place the first screw in the second
slit back from the ear. Make sure the arrow marking is pointing downward.
2.
Slowly extend the rail to view the screw access hole that will allow attachment of the
four 8-32 x 0.313 screws with four 8-32 X 0.344 keps nuts (see #10 in Figure 3). Place
a screw in the first hole and slide the rail to the second hole to insert a screw. Continue
until all four screws have been inserted. If the rail slides too far before placing a screw
in one of the holes, it may lock into position. Unlock rail by pressing down on the lock
mechanism (see # 11 in Figure 3).
3.
Rail should be fully extended after placing the four screws in the holes and securing to
the bracket.
4.
Set the appropriate length and attach two 8-32 x 0.313 screws with two kep nuts in the
two longer slits provided. Make sure the arrow marking is pointed downward. Keep rail
fully extended (see #
in Figure 3).
5.
Repeat steps 1-4 for the second rail.
6.
With rails fully extended, locate the four holes used to attach the rails to each side of
the server. Make sure the rails are positioned with the arrow markings pointed
downward.
7.
Secure to the server using four 8-32 x 0.313 screws for each side.
8.
An assistant may be needed:
Attach the server into the rack mount by screwing eight
10-32 x 0.50 screws into the top and bottom holes of the bracket ears (two for front
right; two for front left; two for back right and two for back left bracket holes) (see #
6, 7 in Figure 3).
9.
To secure the server when transporting or when extension of server is not necessary,
screw two 10-
in the middle hole on the front bracket ears (see #4 in
Figure 3).
The images on the following page may not depict the product received.
Summary of Contents for RS363S15FM
Page 2: ......
Page 35: ...RS363S15FM Rugged Server User Guide RS363S15FM User Guide Page 33 of 32...
Page 36: ......