RS363S15FM Rugged Server User Guide
RS363S15FM User Guide
Page
10
of
32
INSTALLING THE PRODUCT IN AN EQUIPMENT RACK
Using Fixed Mounting Brackets
To install RS363S15FM with fixed mounting brackets in an equipment rack, complete the
steps and see
Figure 1
below:
1.
Line up eight holes on the sides of the rear mounting brackets with eight holes on the
sides of the chassis and secure with 16 (eight per side) 8-32 x 0
(see #2 in Figure 1).
It may not be possible to line up all holes. If more than three holes do not line up on
each side, please contact
Technical Support
.
2.
Line up four holes on the front mounting ears at the desired level on the front of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0
screws provided (see #3 in Figure 1).
3.
Line up four holes on the rear mounting ears at the desired level on the rear of the
equipment rack, and attach to the rack using four (two per side) 10-32 x 0
rack
screws provided (see #4 in Figure 1).
Fixed Mounting Brackets Parts List
ITEM DESCRIPTION
1
MOUNTING EAR, EXTENDED SLOT
2
SCREW, 8-32 X 0.375", 82D PHL FH, SS
3
SCREW, PHIL TRUSS HEAD 10-32 X 0.75"
4
SCREW, PHIL TRUSS HEAD 10-
Figure 1.
Fixed Mounting Brackets
CRYSTAL RS
SERIES SERVER
(NOT
INCLUDED)
CUSTOMER
RACK/ENCLOSURE (SHOWN
FOR REFERENCE ONLY)
3
4
4
3
2
1
1
Table 2
The image shown
may not depict the
product received.
Summary of Contents for RS363S15FM
Page 2: ......
Page 35: ...RS363S15FM Rugged Server User Guide RS363S15FM User Guide Page 33 of 32...
Page 36: ......