Crysalli Beverage Systems
a division of WPD
1739 Sabre Street, Hayward, CA 94545
www.crysalli.com
510.732.0100
Exploded View of
X0101 Faucet
Handle
Pivoting
handle nut
Bonet nut. Loosens with use. Check and tighten daily.
Friction washer
Ball washer
Stainless lever arm
Body gasket
Spring
Nozzle
Shank
Shank sleeve
Coupling nut.
Holds faucet to
shank.
Flow control bullet
with 2 clear gaskets
Plunger with air vent holes and rear gasket.
If water leaks from nozzle, check rear gasket.
Adjustment arm assembly holds
plunger in place and moves it to
adjust flow rate
The faucet handle is self-closing when released. The internal spring creates
this tension to close the valve and shut off flow. The spring can be removed if
self-closing is not desired.
Coupling nut holds faucet body
to shank. Use faucet wrench to
loosen and tighten.
Flow control
X0102 Rear nut fitting
1/4” barb. Used on
CR-1, CR-2 and other
countertop models.
Horizontal position is full
open. Downward or upward
position, quarter turn restricts
or slows flow from the faucet.
Flow can be completely shut
off if turned too far back.
Handle:
10-2055-90
Pivoting handle
nut 10-2220-80
Air vent
Nozzle
bent or straight
Flow control adjuster
Outer ring
Adjustable hex fitting
Using a 2.5 hex wrench to
adjust flow rate
