Crye Precision JUMPABLE PLATE CARRIER, Operator'S Manual

Page: 16 / 24

12
JUMPABLE PLATE CARRIER
TM
(JPC)
6x6” SIDE POUCH (FRONT CARRIER ATTACHMENT)
1. Lay front carrier flat as shown. Open front flap of carrier. Locate two
buckles on side edge of carrier. Position side pouch so that straps face
upward. Open straps of side pouch and insert into buckles as shown.
3. Install ballistic protection (refer to Step 3 on previous page). When
donning JPC with single straps, the wearer may weave the single strap
through the middle rows of webbing on the pouch as shown for added
stability.
2. Secure pouch to buckles by weaving straps back through webbing on
pouch and securing hook and loop panels together as shown. Tip: It may
be helpful to twist the straps over while weaving through the webbing so
as to not catch the hook and loop panels until the strap is twisted back
over.
4. Alternatively, the single strap may simply be worn directly over the
pouch without weaving the single strap through the middle rows of
webbing to allow easier doffing.