Crye Precision JUMPABLE PLATE CARRIER, Operator'S Manual

Page: 11 / 24

OPERATOR INSTRUCTIONS
7
1. Lay carrier flat as shown. Open carrier along bottom edge of interior
side. Locate plate pocket.
2. Insert ballistic protection. JPC supports low-vis protection up to Level
IV standalone plates. If inserting plates, the concave side of the plate
should be facing towards body when the vest is worn. Insert soft armor
behind plate (between plate and body when worn) if using non-standalone
plates.
3. Secure plate into position by closing bottom edge of carrier. Repeat for
other carrier.
INSTALLING BALLISTIC PROTECTION