Crye Precision JUMPABLE PLATE CARRIER, Operator'S Manual

Page: 17 / 24

OPTIONAL ACCESSORIES
13
6x12” FLANK POUCH
1. Lay front carrier flat as shown. Unsnap all three pouch straps as
shown and lay underneath Skeletal™ cummerbund as shown. Position
flank pouch so that the straps face upward and opening of pouch opens
towards the rear of the carrier. Pouch can be installed anywhere along
Skeletal™ cummerbund.
3. Snap pouch straps back together once they are successfully woven
through both the cummerbund and pouch webbing as instructed. The
snaps should be underneath the middle row of Skeletal™ cummerbund
webbing when complete.
2. Weave the pouch straps through the webbing openings of the
cummerbund and pouch. The strap should first go through the opening
in between the two layers of cummerbund webbing, then through the
webbing of the pouch. This option allows other items to attach to the
outer side of the cummerbund.
4. This flank pouch supports low-vis ballistic protection up to Level IV
standalone plates. Up to two 6x6” plates can fit side-by-side in pouch.
To install ballistic protection, flip pouch and cummerbund over and open
pouch as shown. Insert ballistic protection as desired and close pouch.