Crye Precision AIRFRAME, Operator'S Manual

Page: 12 / 20

9 AIRFRAME ™ ATX HELMET
FIT ADJUSTMENT
HELMET IS TOO LOOSE OR TOO LOW
If the helmet is too low on the brow, not compatible with eyewear,
or has other similar compatibility issues, it may be too loose.
ƒ
Increase the number of pads in shell (additional pads can be
purchased separately)
ƒ
If additional pads do not correct the fit, a smaller helmet shell
size may be required
HELMET IS TOO TIGHT OR TOO HIGH
It is extremely important that the helmet not be sized and fitted to sit
too high on the head. If the crown pads do not hit the head (wearer
cannot feel pads), then the helmet may be too high. When fitting,
look upward by moving your eyes, but without moving your head. If
the rim of the helmet cannot be seen, the helmet may be too tight.
ƒ
Try rearranging the pads
ƒ
If rearranging the pads does not alleviate the tightness, a larger
helmet shell size may be required
A
B