Crye Precision AIRFRAME, Operator'S Manual

Page: 14 / 20

11 OPERATOR INSTRUCTIONS
Place the
REAR SHELL
onto the
LONG SHELL SCREWS
and loosely
thread on
SMALL T-NUTS
.
Insert two
SHORT SHELL SCREWS
into the side holes on the helmet.
With the
FRONT SHELL
held upside down, install the two
LONG
SHELL SCREWS
and two
NYLON SPACERS
.
REASSEMBLY
Instructions for reassembly of helmet shell halves.
* If assembling AirFrame™ accessories such as Chops, Ears, or Rails, refer to their instructions for greater detail.
1 2
3A 3B
From the inside of the helmet, loosely thread on
SMALL T-NUTS
.