6 |
P a g e
Assembly
Step 1:
Unpack the system and ensure all the components are included with the system. Your
system is shipped with the following components:
System Sizing
All Crusader UV systems are rated for a specific flow rate under specific water quality parameters.
The equipment has been designed to ensure that the appropriate dose will be delivered provided
all parameters are followed.
PLEASE NOTE
that the flow rate for each system can be higher or lower
than what the system is rated for however this will change the dose level that the system will
deliver. A lower flow is not a concern as the dose will increase however a higher flow rate will
decrease the dose and therefore compromise the microorganism inactivation.
It is important to know the maximum flow rate that your water system delivers. If you do not have
this information you can simply fill a 1 gallon bucket with water and time how long it takes to fill up.
This will be the maximum flow rate for the home. Choose a Crusader system that is suitable.
PLEASE NOTE:
It is always better to oversize your system then to undersize. For example, if your
pump delivers 8 gpm it is recommended to install any of the Crusader 10 gpm systems. There will
come a time where your home is using water at the pump’s maximum capacity.
