Crumar MOJO, User Manual

Page: 7 / 28

7
5. MIDI IN: This five-pole DIN connection is used to connect the CRUMAR Mojo to
a device capable of sending MIDI data, such as a master keyboard or a
pedal board.
This connection is also used when updating the instrument’s firmware with MIDI
Firmware Upload (MFU) technology.
6. MIDI OUT: This five-pole DIN connection is used to connect the CRUMAR Mojo
to a device capable of receving MIDI data. The instrument’s controls are
configured as follows:
•
Channel 1: Drawbars, pots and all other upper manual controls
•
Channel 2: Lower manual
•
Channel 3: Lower manual if “Pedal to Lower” function is enabled
•
With new features of firmware 1.4, Mojo can transmit also on
channel 4 and 5 (upper and lower). See page 9 for details
CAUTION: It is highly recommended not to connect or disconnect MIDI cables
with the instrument on. The instrument can be damaged or work incorrectly.
7. USB Output: This connection is used to send MIDI data from the CRUMAR
Mojo to a computer via USB without the need for a converter. For example, the
CRUMAR Mojo could be used to play sounds from a software-based synthesizer
on a laptop computer. Please check software driver compatibility on the
computer before connecting the CRUMAR Mojo.
8. Swell: This 6.3 mm stereo output jack connection is used to connect an
expression pedal to the CRUMAR Mojo.
Please use only genuine CRUMAR expression pedals. Other pedals and/or
equipment can damage the instrument. For a compatibility list, please contact
CRUMAR MUSICAL INSTRUMENTS.
CAUTION: Do not connect or disconnect the expression pedal with the
instrument on. The instrument can be damaged or work incorrectly.
9. Sustain: This 6.3 mm stereo output jack connection is used to connect an
optional momentary “on/off” type of sustain pedal to the CRUMAR Mojo. The
instrument accepts both pedals configured as normally closed and pedals
configured as normally open.
The instrument automatically configures the pedal at start-up. Connect the pedal
to the instrument before turning the instrument on. The internal VBC CE 2 organ
software does not respond to MIDI sustain messages.