![Crumar MOJO User Manual Download Page 18](http://html1.mh-extra.com/html/crumar/mojo/mojo_user-manual_2691340018.webp)
18
Upper Manual Preset 3 – Sustain Pedal, MIDI Channel 1
This button is used to enable or disable functionality of a sustain pedal on MIDI channel 1.
This setting is only applicable for instruments or modules connected to the CRUMAR Mojo
on MIDI channel 1. The VB3 CE 2 software does not recognize MIDI sustain pedal
messages. This button lights up when the function is active.
Upper Manual Preset 4 – Expression Pedal, MIDI Channel 1
This button is used to enable or disable whether MIDI expression pedal information
transmits on CC11 to instruments or modules connected to the CRUMAR Mojo on MIDI
channel 1. This button lights up when the function is active.
Upper Manual Preset 5 – Global Transpose - Decrease Value, -1
Upper Manual Preset 6 – Global Transpose - Increase Value, -1
These two buttons are used to adjust the global transposition of the instrument +/- 12
semitones. This change affects both the upper and lower manuals of the instrument.
Pressing one of these buttons changes the global tuning of the instrument by 1 semitone
up or down. When the transposition of the instrument is not set at “0,” one of the LEDs on
these buttons is illuminated, depending on whether the instrument is tuned higher or lower
than “0.” When the LEDs of both lights are off, the instrument is tuned to “0.” Even when
transposed, the global extension of the instrument is 61 notes. It is not possible to make
the VBE CE 2 software generate notes above or below the traditional range of a tonewheel
organ.
Manual Upper – Rotary Simulation, On/Off
This button is used to enable or disable the rotary speaker simulation. If the CRUMAR
Mojo is connected to a real rotary speaker, the rotary speaker simulation should be turned
off. This button lights up when the function is active.
Pedal to Lower – Panic
This button is used to send an “all notes off” MIDI “panic” message to all 16 MIDI channels.
This function also resets the CRUMAR Mojo MIDI interface. If this button is held for three
seconds, the CRUMAR Mojo sends an “all notes off” message to all 16 MIDI channels and
then reboots the CRUMAR Mojo MIDI interface but not the entire system.
Summary of Contents for MOJO
Page 1: ...Firmware Revision 1 4 User Manual MADE IN ITALY ...
Page 25: ...25 ...