![Crumar MOJO User Manual Download Page 11](http://html1.mh-extra.com/html/crumar/mojo/mojo_user-manual_2691340011.webp)
11
In the middle of the two drawbars sets, there are two brown drawbars used to
control the 32’ and 16’ lengths when a MIDI pedal board is connected to the
instrument or when the “Pedal to Lower” function is active.
•
Control Knobs: These six knobs are used for real-time control over various
parameters of the sound of the instrument.
Volume: Overall output volume of the instrument
Drive: Adjusts the amount of saturation from the tube overdrive emulation
Click: Adjusts the volume of the key-click simulation
Reverb: Adjusts the depth of the spring reverb simulation
Bass: Adjusts the equalization of the output of the bass frequency of the
instrument. When the knob is set in the middle position (12:00), the equalization
is at zero.
Treble: Adjust the equalization of the ouput of the treble frequency of the
instrument. When the knob is set in the middle position (12:00), the equalization
is at zero.
These knobs are used in conjunction with the “Shift” button to edit additional
parameters of the sound of the instrument. For more information, see Section 7:
Edit and Programming Mode.
16'
One octave under the fundamental with repetition of first low
octave
5-1/3'
A fifth above the fundamental
8'
Fundamental
4'
An octave above the fundamental
2-2/3'
An octave and a fifth above the fundamental
2'
Two octaves above the fundamental with repetition of the
last upper octave
1-1/3'
Two octaves and a third above the fundamental
1-3/5'
Two octaves and a fifth above the fundamental
1'’
Three octaves above the fundamental with repetition of the
two last upper octaves
Summary of Contents for MOJO
Page 1: ...Firmware Revision 1 4 User Manual MADE IN ITALY ...
Page 25: ...25 ...