21
The following parameters are the default parameters assigned to the physical controls and
the MIDI control change numbers associated with the control.
Drive – Generator Xtalk. CC91.
Click
–
Keyclick length. CC92.
Reverb – Reverb Length. CC93.
Bass
–
Rotary Speaker Balance. CC94.
Treble – Percussion Volume. CC95.
Pedal Drawbar 16'
–
Pedal sustain. CC96.
The VB3 CE 2 parameters associated with the various knobs on the panel are set at the
factory. It is possible to assign the knobs to different parameters of the software using the
“MIDI Learn” feature of the VB3 CE 2 software. A monitor and mouse must be plugged in
to the instrument. To change the parameter assigned to a control, right-click on the
parameter to be assigned, select “MIDI Learn” from the menu, and move the control to
which the parameter will be assigned. To save the assignment, click “Store” on the VB3
CE 2 interface.
FACTORY RESET
To reset the CRUMAR Mojo’s knobs and percussion and vibrato buttons to their original
factory settings, press and hold the “Upper Manual” and “Lower Manual” buttons together
for one second.
Summary of Contents for MOJO
Page 1: ...Firmware Revision 1 4 User Manual MADE IN ITALY ...
Page 25: ...25 ...
