Crumar MOJO, User Manual

Page: 17 / 28

17
The CRUMAR Mojo’s “Edit” mode can be accessed by pressing the “Shift” button which is
found just above the pedal drawbars on the top panel of the instrument. When “Edit” mode
is engaged, the LED on the “Shift” button blinks. In “Edit” mode, various parameters
related to sound and global functions can be controlled with buttons and knobs on the
control panel.
GLOBAL EDIT FUNCTIONS
The buttons shown in Figure 4 control various global instrument settings when the
instrument is in “Edit” mode. Changes made while in “Edit” mode are set when the “Shift”
button is pressed to exit “Edit” mode.
Fig. 4
Upper Manual Preset 1 – Tonewheel Generator Set and MIDI Program Change -
Decrease Value, -1
Upper Manual Preset 2 – Tonewheel Generator Set and MIDI Program Change -
Increase Value, +1
These two buttons are used to scroll through the different tonewheel generator settings
and also to send program change messages to external instruments or modules
connected to the CRUMAR Mojo on MIDI channel 1.
The preset 1 button decreases the value of the setting by 1, while the preset 2 button
increases the value by 1. When the lower limit of tonewheel generator set number 1 or
program change 0 is reached, the LED on the preset 1 button lights up. When the upper
limit of program change 127 is reached, the LED on the preset 2 button lights up.
7) EDIT AND PROGRAMMING MODE