24
•
Software Installation & SD Memory Utilities
SAM4s SPS-2000 Quick Start Guide v1.10
8.
The ECR display will monitor file downloads. The message “Image writing
finished!!” displays when complete. When successful the TFTP Server window will
display “Sent . . .” for each file as shown below.
Perform an ALL Clear
1.
Power down the SPS-2000 (the main power switch is located on bottom of SPS-2000
in the right-rear corner).
2.
Hold front power button down.
3.
Turn SPS-2000 main power switch
ON
while holding down front power button.
4.
Touch [
1
][
2
][
8
][
7
] for system password.
5.
Touch
ALL CLEAR
.
6.
Touch
YES
when prompted “ALL CLEAR THE MACHINE?”.
7.
The SPS-2000 will reboot.
8.
Enter the station number after the station reboots: [1]
OK
.
Monitor the TFTP Server
screen to review the progress
of the file downloads. When
data is being transmitted, the
message “Sending. . .”
displays. When complete,
the message “Sent. . .”
displays.
