CRS SAM4s SPS 2000 Quick Start Manual Download Page 16 | Manualshive

Page: 16 / 51

background image

16

•

Software Installation & SD Memory Utilities

SAM4s SPS-2000 Quick Start Guide v1.10

Required Support Resources

•

A PC with a network connection and USB port available to download new software.

•

Equip your support PC with a SD Memory Card reader. The SD card provides the most
convenient method of updating the SPS-2000 application software and also can be used
for program loading/saving, capturing SPS-2000 screens for documentation purposes and
transferring bitmap images to the SPS-2000. (CRS supplies SD cards/readers: P/N
520000 - SanDisk SD 128mb card; P/N 520001- SanDisk SD 256mb card; P/N 520002 -
SanDisk Mobilemate SD+ 5-N-1 card reader/writer.)

NOTE

: SD cards must be formatted as FAT 32. To avoid compatibility issues, CRS

recommends that you purchase SD cards from CRS.

•

LAN (crossover) cable.

CRS Part #

250042

•

SolarWinds.Net TFTP Server. This is a free program that can be downloaded from the
SPS-2000 dealer support page at www.crs-usa.com. With this program running on your
support PC connected to an SPS-2000 by LAN, you can access software updates from the
SPS-2000. The TFTP Server from SolarWinds will run on any Microsoft Operating
System including Windows 95, 98, NT, ME and Windows XP. (TFTP (

Trivial File

Transfer Protocol

) is a simple form of the File Transfer Protocol (FTP), provides no

security features, and is often used by servers to boot diskless workstations.)

•

Depending upon the method you are using to update the SPS-2000, download the
appropriate files from the SPS-2000 dealer support page at

www.crs-usa.com

.

«
...
14
15
16
17
18
...
»

Summary of Contents for SAM4s SPS 2000




















































Reviews:

No comments

Related manuals for SAM4s SPS 2000

Brand: JCM GLOBAL Pages: 138

Digipass 270 Xpress

Brand: Vasco Pages: 2

Brand: Hanchang System Pages: 14

Brand: New Pos Technology Pages: 4

Brand: National Instruments Pages: 15

Brand: FingerTec Pages: 5

Brand: IVC Displays Pages: 32

Brand: Tcang Pages: 13

Brand: National Instruments Pages: 8

Brand: ESA Pages: 976

E-Touch Integrated

Brand: E-Pos Pages: 26

Brand: ADATIS Pages: 8

Brand: Quest Engineering Pages: 11

Brand: POSIFLEX Pages: 16

Brand: EC Line Pages: 10

Brand: Partner Pages: 64

Brand: Partner Pages: 35

Brand: CHC Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands