Installation
13
English
2.
Hold the Middle Nut in position to prevent rotation and tighten the Backnut
until resistance is felt between the Seal and cable, then turn the Middle Nut
through a further half to one full turn to complete the Outer Seal.
Armoured cable
1. Backnut
2.
Compression Spigot
3.
Compression seal
4.
Middle Nut
5.
Reversible Armour Clamping Ring
6.
Armour Spigot
7.
Inner seal
8. Entry
1.
Expose the armour/braid “A” by
stripping the cable's armoured / woven
layer and removing the cable filler.
2.
Push the cable through the Armour
Spigot. Spread armour/braid over the
Armour Spigot until the end of the
armour/braid is up against the shoulder
of the armour cone. Position the
Armour Clamping Ring.
A=15mm
