21
How to Control Outputs and Devices
The keypad enables you to control external devices, such as an air-conditioner or heater. To
activate or halt a device:
Step 1
: Press on the Output Control button
Step 2
: Use Right/Left button and Select the required Output number
Step 3
: Use the enter button to activate or deactivates a specific output
Step 4
: Press on the EXIT/ESC button to exit to the main screen
1.
2.
3.
Quick Control Button (If enabled by the installer at Installation)
The installer is able to program and define one of the keypad keys
A
or
B
or
C
or
D
as a quick
Memory function button. (For details ask the installer).
Entering the User Programming mode
There are 2 levels of programming mode,
User mode
and
INSTALLER mode
. Normally the
installer gives you access to the User mode, by setting user 1 code as master user, so you can
add, delete, or change the user codes. If you request it, your installer can provide you with
access to the INSTALLER mode as well. To get into user mode, provided the system is NOT
armed, Press
<PROGRAM> key
, enter
Master code
and press
<ENTER>
. The system is in
User programming mode.
For Example :
P1234E
P = program key
1234 = master code user 1
E = ENTER key
Exit Program Mode
To exit User program mode, press on the
<ESC/EXIT>
button until the system asks whether
you want to exit and press
<ENTER>
to confirm. Afterwards, the system will go back to main
display.
