Page 21
+++++Panel Diagnostic & Default ++++
Display Panel Software Version Number
P200E 1E
Display the Panel Software Version Number
Display Keypad Address Number
P200E 2E
Display Keypad Address Number
Display Areas Assigned to this Keypad
P200E 3E
Display Areas Assigned to this Keypad
Display Active Time Zones
P200E 4E
Display Active Time Zones
Display Battery Voltage
P200E 5E
Display Battery Voltage
Walk Test Mode
P200E 6E
Walk Test Mode
Update “Firmware” to LCD KP, Zone and Output Expanders
P200E 7E
Update “Firmware” to LCD KP, Zone and Output Expanders
Update “Text Files” to LCD Keypads
P200E 8E
Update “text Files” to LCD Keypads
Restore User & Installer Codes plus Telephone Numbers to Defaults
P200E 9E
Restore User/Installer Codes & Telephone #’s to Default Values
Restore All Factory Defaults
P200E 10E
Restore All Factory Defaults (excludes LCD text)
Clear Alarm Memory Buffer
P200E 11E
Clear Alarm Memory Buffer
Default ALL LCD text
P200E 12E
Default ALL LCD text.
Read RSSI from Pendants and Wireless Zones
P200E 14E
Read RSSI from Pendants and Wireless Zones
+++++IP Alarm Setup+++++
Panel IP Address
P201E 1E
Control Panel IP Address
(Can also be viewed by pressing the number “9” for 5 seconds in normal mode)
IP Gateway Address
P201E 2E
IP Gateway Address
(Default = 000.000.000.000)
IP Subnet Mask
P201E 3E
IP Subnet Mask
(Default = 255.255.255.000)
IP Setup Options
P201E 4E
IP Setup Options
(Default = All Off)
1 = DHCP/Manual Panel IP address (Off= Automatic DHCP)
2 = Enable Ethernet Test
3 = Sync Panel to Internet Clock
4 = Enable Serial over IP Communications
5 = Spare
6 = Spare
7 = Spare
8 = Spare
Show Panel MAC Address
P201E 5E
Show Panel MAC Address
(Can also be viewed by pressing the number “8” for 5 seconds in normal mode)
CSV IP Name
P201E 6E
CSV IP Name
CSV IP Password
P201E 7E
CSV IP Password