Crossfire 1100GT User Manual Download

Page: 64 / 113

MAINTENANCE

Spark Plugs

Spark Plug Gap/Torque

Electrode Gap

Plug Tightening Torque

0.1mm

14.3 ft. lbs. (20

1.5 Nm)

NOTICE

Using non-recommended spark plugs can result in serious engine damage. Always use our

company recommended spark plugs.

Spark plug condition is indicative of engine operation. The spark plug firing end condition should be
read after the engine is warmed up and the vehicle is driven at higher speeds. Immediately check the
spark plug for correct color.

A hot exhaust system and engine can cause burns. Wear protective gloves when removing a
spark plug for inspection.

Specified spark plug: K6RTG.

Spark Plug Removal and Replacement

1.Remove the spark plug cap.
2.Using the spark plug wrench provided in the tool kit, remove the plug by rotating it

counterclockwise.

3.Reverse the procedure for spark plug installation.

1100GT

User Manual

Summary of Contents for 1100GT


















































































































Search results

Summary of Contents for 1100GT

Reviews:

Related manuals for 1100GT

Brands by name

Popular brands

Crossfire 1100GT, User Manual

Search results

Summary of Contents for 1100GT

Reviews:

Related manuals for 1100GT

Brands by name

Popular brands