Crossfire 1100GT, User Manual

Page: 34 / 113

26
FEATURES AND CONTROLS
Tip: The position of the shoulder strap can be adjusted
to the height of the operator.
2. Push the latch plate into the buckle until it clicks.
3. Press the red release latch on the buckle to release
the seat belt.
Seat Belt Inspection
Inspect all seat belts for proper operation before each use of the vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the
buckle. A click indicates that it's securely latched.
2. Push the red release latch in the middle of the buckle to make sure it releases freely.
3. Inspect the full length for any damage, including cuts, wear, fraying or stiffness. If any damage is
found, or if the seat belt does not operate properly, have the seat belt system checked and/or
replaced by an authorized dealer.
4. To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use
bleach, dye or household detergents.
1100GT User Manual
26