CCpilot V1000/V1200
Revision: 1.0
Technical Manual
2022-04-01
www.crosscontrol.com
26
7.6.
Connector 5 - USB-C
USB 3.0 port located in a USB-C connector on the backside of the device. From the factory a
dust cap is mounted for protection.
8.
Specifications
8.1.
Technical data
Temperature specification
Operating
-30 to +70 °C
Storage
-40 to +80 °C
Kernel
Main Processor
NXP™ i.MX8 QuadXPlus: ARM 64-bit, 1200MHz, Cortex
®
-A35
Co-processor
STMicroelectronics STM32G070RBT6, Cortex
®
-M0+
Data storage
4 Gbyte, Industrial grade eMMC
(Note)
RAM memory
2 Gbyte, LPDDR4
Note:
The eMMC is used in pseudo SLC mode and implements both static and dynamic wear levelling to
reach the best reliability. The number of program/erase cycles is between 20k to 60k depending on the
manufactures and temperature. Our recommendation for the application software is to temporary
cache in RAM and to write larger chunks of data to the eMMC. This recommendation is not specific to
eMMC but is applicable to all flash memories.
Power Supply
Supply voltage
Nominal
Voltage range
12 V
DC
or 24 V
DC
6 V
DC
…36 V
DC
Power consumption
CCpilot V1000
Typical, operating
Max, operating
Suspend to RAM
Shutdown(
wake on CAN
)
Shutdown
Vin = 12 V
DC
Vin = 24 V
DC
1.1A (typ)
540 mA (typ)
2.0A
1.1A
42 mA (typ) 23 mA (typ)
350 µA (typ) 200 µA (typ)
250 µA (typ)* 125 µA (typ)*
