CCpilot V1000/V1200
Revision: 1.0
Technical Manual
2022-04-01
www.crosscontrol.com
22
Range
Circa 100 meters
Max Transmit Power
Class 1 +8dBm from antenna
7.
Connectors
There are either three or four M12 connectors depending on product model. These are marked
1, 2, 3 and 4 and are accessible from the rear of the device. Refer to Figure 10 for an overview
of the connectors. For product models with three M12 connectors, connector 2 is not mounted.
7.1.
M12 connectors
Pay close attention to the coding; excessive force should not be used when mating the
connectors.
Figure 10: M12 connector pinout, 8-pin A-coded, 5-pin A-coded, 8-pin X-coded and 5-pin A-
coded.
The M12 connector pins/receptacles are made of a gold-plated copper-zinc alloy. It is
recommended to use gold-plated pins/receptacles in the mating connectors. Using different
plating in the cable connectors might cause galvanic corrosion. The M12 contact body is made
of polyamide and the sleeve around it is made of nickel-plated zinc.
Note that all three M12 connectors must be mated with its corresponding cable connector or a
proper blind plug to maintain the IP-classification.
