2.1.3 Web page M & C
Enter the following address in a web browser to access the M & C Web page:
http://<ip address of 41xx>/serial/0/setup.htm where <ip address> is the IP address
of the unit. Figure 4-C shows the web page from a model 4117-14 frequency converter.
Figure 4-C: Model 4117-14 Web page
2.1.4 SNMP Configuration
Setting of SNMP parameters such as Community Write and Community Read strings requires a
Telnet
®
connection to port 9999. The following instructions explain how to establish such a
Telnet
®
connection using
Windows XP's Hyper Terminal utility .
Start the Hyper Terminal application and select “New Connection” from the “File” drop down menu. The next
screen is a “Connect To” dialog box. Select TCP/IP (Winsock) from the “Connect” using drop down menu.
Enter the IP address of the 4117-14 in the “Host Address:” field and 9999 in the “Port Number” field.
Figure 4-D shows an example of the Hyper Terminal settings required to access the SNMP configuration menu.
4117-14 Manual, Rev. J
Page 9
03/27/17
