Cross Technologies 4117-14, Instruction Manual

Page: 6 / 15

2.0 Installation
The 4117-14 Block Up/Downconverter consists of a 8”W X 6”H X 16”D Weather Resistant* enclosure .
A switching, ± 12, +24, +5 VDC power supply provides power for the internal assemblies. The 4117-14 can be
secured to a mounting plate using the 4 holes on the bottom of the front and rear panels. See Figure 2.5 for
mounting dimensions.
Figure 3.0: Model 4117-14 Up/Downconverter Front Panel
2.0.1 Connection to AC Input Power
The 4117-14 utilizes a pre-assembled AC power input cable as described below.
4117-1 14 Power Input Connector, FCI Clipper Series, CL1M1102 & Crimp Pins
Mating Mating Connector, Clipper Series, CL1F1101 and Crimp Pins
and C CL101021 and CL101021 Backshell
Pin Input Connector Pin Description
1 100-240 ±10% VAC, 47-63 Hz, 20 watts max.
2 Neutral
3 Ground
4117-14 Manual, Rev. J Page 6 03/27/17