2.0 Installation
2.1 Mechanical
The 2099-2424 10 MHz Source/Inserter consists of one RF PCB housed in a 1 RU (1 3/4 inch high) by
12 inch deep chassis. Redundant switching, +27 VDC power supplies provides power
for the assemblies if equipped with option R. Otherwise, a single swi27 VDC power supply is used.
The 2099-2424 10 MHz Source/Inserter can be secured to a rack using the 4 holes on the front panel.
Figure 2.0 shows how the 2099-2424 10 MHz Source/Inserter is assembled.
AC A
AC B
FIGURE 2.0 2099-2424 10 MHz Source/Inserter Mechanical Assembly
2099-2424 Manual, Rev. C
Page 10
02/12/20
