49-3000063
7
Sanitize
This option reduces certain types of bacteria by 99 .8%, including: Staphylococcus aureus,
Pseudomonas aeruginosa and Klebsiella pneumoniae . The anti-bacterial process occurs when
high heat is used during a portion of the drying cycle .
NOTE:
Do not use this cycle on delicate fabrics .
H
E
F
Start/Pause
Press to start a dry cycle . If the dryer is running, press it once and it will pause the dryer .
Press it again to resume the dry cycle .
G
Steam Refresh Cycle (on some models)
For slightly wrinkled dry garments . Significantly reduces wrinkles on up to 5 garments . After
the
Steam Refresh
Cycle, the unit will beep and display “0:00 .” If the unit is not turned off or
if the door is not opened, the dryer will continue to tumble for 30 minutes . At the end of 30
minutes, it will display “0:00” and the cycle will be complete .
NOTE:
A single extremely light fabric item may need to have an additional item included to
achieve optimum results .
USING THE DR
YER
Getting started
Level
The sensor continuously monitors the amount of moisture in the load . When the moisture in
your clothes reaches your selected dry level, the dryer will stop .
NOTE:
Sensor dry
Level
only works with
Cottons
,
Normal
,
Perm Press
,
Delicates
,
Quick Dry
,
Bulky
,
Towels/Sheets
,
Dewrinkle
and
Steam Dewrinkle
cycles .
More Dry
Use for heavy-duty fabrics or items that should be very dry, such as towels .
Dry
Use for normal dryness level suitable for most loads . This is the preferred
cycle for energy saving .
Less Dry
Use for lighter fabric (ideal for ironing) .
Damp
For leaving items partially damp .
I
Delay Dry
Use to delay the start of your dryer .
1 . Choose your dry cycle and any options .
2 . Press
Delay Dry
. You can change the delay time in 1 hour increments, using the
Delay Dry
button .
3 . Press the
Start/Pause
button to start the countdown .
NOTE:
If the door is opened while the dryer is in
Delay Dry
, the countdown time will not
restart unless the door is closed and
Start/Pause
button has been pressed again .
J
Damp Alert
This option causes the dryer to beep when clothes have dried to a damp level . Remove
items that you wish to hang dry . The
Damp Alert
will only beep when this option is selected,
and the dryer will continue to dry .
Removing clothes and hanging them when they are damp can reduce the need to iron some
items .
Ext Tumble
Minimizes wrinkles by adding approximately 1 hour of no-heat tumbling after clothes are dry .
The estimated time remaining display will show “END” .
The extended tumble time does not get added to the cycle time on the display .
K