49-3000063
17
Optional Instructions
INSTALLING THE STACK BRACKET KIT
INSTALL DRYER AND
BRACKET ON WASHER
A.
Lift the dryer on top of the washer . Be careful not
to scratch the top of the washer with the brackets .
Protect the washer control panel with cardboard
or other protection . Be sure to lift the dryer high
enough to clear the washer control panel .
B.
Align the holes in the bracket with the holes in the
back of the washer . Using a Phillips screwdriver,
attach the 2 #8 x 1/2” tapping screws . Repeat on
both sides of the washer .
5
Failure to do so may result in back or other injury,
or property damage .
• Use two or more people to install dryer .
• Avoid tipping and rupture of utility services .
• Dryer must be securely attached to the washer .
•
DO NOT
place the washer on top of the dryer .
• Mobile Home or Manufactured Home Installation
– Stacking of a gas dryer is not permitted in a
mobile home or manufactured home .
WARNING
- Excessive Weight
Hazard
Disconnect power before installing .
Failure to do so could result in
serious injury or death .
WARNING
FINALIZE THE INSTALLATION
A.
Refer to the washer Installation Instructions to
complete the washer installation .
B.
Refer to the dryer Installation Instructions to
complete the dryer installation .
C.
Carefully slide or walk the stacked washer and
dryer into place . Use felt pads or other sliding
device to assist moving and to protect flooring .
6
Do not push on the dryer once
installed to top of the washer .
Pushing on the dryer may result in pinched fingers .
CAUTION
Attach brackets to
back of washer
Washer
Dryer
Place
hands
here
Place
hands
here