7
Cromtech Generator
Operation & Instruction Manual
STEP 1
Check fuel level at fuel level gauge.
STEP 2
If fuel level is low, refill with the correct fuel, use unleaded petrol.
STEP 3
Be sure to use the fuel filter screen on the fuel filter neck.
CHECKING COMPONENT PARTS
Check the following items before starting engine:
•
Fuel leakage from fuel hose, etc.
•
Bolts and nuts for looseness.
•
Components for damage or breakage.
•
Generator not resting on or against any adjacent wiring.
CHECK GENERATOR SURROUNDINGS
�
�
�
WARNING
Make sure you review each of the warnings in order to prevent fire hazard.
•
KEEP
area clear of flammables or other hazardous or combustible materials.
•
KEEP
generator at least 1 metre away from buildings or other structures.
•
ONLY
operate generator in a dry, well ventilated area.
•
KEEP
exhaust pipe clear of foreign objects.
•
KEEP
generator away from open flames. NO SMOKING!
•
KEEP
generator on a stable and level surface.
•
DO NOT
block generator air vents with paper or other material.
GROUNDING THE GENERATOR (if applicable)
These generators are ground to earth via the frame. If grounding is required by an earth stake, consult
with a licensed electrician prior to installation.
BATTERY INSTALLATION – (Electric Start Models)
Recommended battery:
•
Type – Gel mat sealed
•
Capacity (Ah/5hr) – 12V-21AH or more
•
Size – Less than 185(L) x 125(W) x 150(H) mm
�
�
�
WARNING
Death, personal injury and/or property damage may occur unless instructions are followed carefully:
•
KEEP
area clear of flammables or other hazardous or combustible materials.
•
USE
battery of recommended capacity.
•
Turn the starter switch to the “O” (stop) position when mounting or dismounting battery. When
mounting battery, connect the positive (+) cable first and then the negative (-) cable to the battery.
•
BE CAREFUL
not to short battery cables. When dismounting battery, disconnect negative (-) cable
first:
o
RED CABLE – To positive (+) terminal
o
BLACK CABLE – To negative (-) terminal
•
Incorrect connection of terminals will result in wiring and engine damage.
•
ENSURE
bolts and nuts are tightened on terminals securely so they will not be loosened by
vibration.
•
DISCONNECT
battery cables when charging battery.