Owner's Manual
VE-1P Vertical Edger
Page 30 of 33
WHEEL POSITION DIAL INDICATORS
This feature allows accurate adjustment of new wheels, dual wheels or wheels
of varying thicknesses for fast changeovers. The dial indicators are first zeroed
in relation to the spindle adjusting plate for the horizontal plane (Fig. A) and
the special indicator plate for the vertical plane (Fig. B). Avoid bottoming out
the indicator. Once set, the readings should be recorded in a log specific to
each wheel size or configuration used. When a changeover is required, the
machine is adjusted to these readings. On dual configurations, always mount
the narrower grinding wheel closest to the spindle motor. Check the edge of
the first piece of glass after adjusting.