Owner's Manual
VE-1P Vertical Edger
Page 16 of 33
SECTION 4 (continued)
A
D
E
B
C
Before proceeding with the following steps, make certain that the
conveyor is operating properly. See Section 4, “CONVEYOR”, and
perform all steps as outlined before any operation with glass.
4)
Insert a piece of glass of a thickness for the wheel size and feed it into the
edger. Stop the conveyor the using the toggle switch when the glass is
above the grinding wheel.
5)
Loosen the jam nut and spindle lock (“
D
”) and turn the vertical adjustment
handwheel (“
C
”) clockwise to raise the grinding (polishing) wheel until it just
contacts the glass. Then turn the vertical adjustment handwheel 1/2 turn
counterclockwise so that the wheel is no longer contacting the glass.
