background image

HOW TO PROCEED WHEN SERVICE IS NEEDED

 

First, please have in hands the model of your autoclave, voltage, serial number and the date of manufacture found on 

the identification label located in the back of the autoclave (Fig. 1, page 8 and Fig. 20, page 21) and a description of the 
problem. Next, 

contact your local dealer

 for an evaluation and possible repair your equipment. It will be also necessary to 

have the original invoice from your dealer to confirm the date of purchase.

 

Always  contact  your  local  dealer

.  If  you  have  problems  contacting  your  dealer,  contact  us  by  e-mail: 

[email protected] or through our website: www.cristofoli.com.

GUIDANCE FOR FINAL DISPOSAL OF THE EQUIPMENT

 

The environment is something that belongs to everyone, therefore, it is up to each one of us to make the decisions 

that will help in its preservation and reduction of the damages resulting from human activities.

 

All  products  have  a  useful  life  span,  but  it  is  not  possible  to  determine  how  long,  as  it  varies  according  to  the 

intensity and how the equipment is used or handled. Exception made for the component “lid” which must be replaced 
every 10 years in accordance to “

Preventive Maintenance

” (Item 7, Page 19).

 

Cristófoli  Equipamentos  de  Biossegurança  Ltda

,  makes  clear  its  concern,  already  demonstrated  by  the 

implementation  of  the  Environmental  Management  System,  according  to  standard  NBR  ISO  14001:2004,  strongly 
recommends  users  of  their  products  to  seek  the  best  destination  when  disposing  your  equipment  or  its  components, 
taking into account the materials recycling legislation effective in your country.

 

We  advise  you  to  take  your  equipment  to  specialized  recycling  companies  that,  due  to  the  continuous  and  fast 

paced  development  of  new  recycling  technologies  and  materials  reuse,  provide  the  best  way  of  disposing  the 
equipment. Cristófoli contributes this way to reduce the consumption of non-renewable raw materials.

 

It is worth reminding you that your autoclave packaging, as indicated on the box itself, is recyclable.

 

Other items to be observed for the preservation of our planet:

 

 

- Reduce the amount of consumption material;

 

 

- Reuse all durable goods for as long as possible;

 

 

- Properly dispose the amalgam residues because they contain mercury, which contaminates the soil;

 

 

- Recycle all possible materials at the end of their useful life span.

 

 

- Perform the correct separation of all waste.

 

On behalf of all users, we thank you for your comprehension and cooperation.

CRISTÓFOLI

A U T O C L

A V E S

I N S T R U C T I O N    M A N U A L

24

Summary of Contents for Vitale Plus 12



























Reviews: