7
Never
remove the main unit or touch the boiling tray while the distiller is on.
Never
place your distiller near any heat source (electric heaters, gas ovens, etc);
Never
use extensions, voltage transformers or any kind of adapters, do not plug the
distiller into inappropriate voltage outlets;
When the Distiller is not in use, disconnect the power cable from the outlet;
When the main unit is lifted or tilted, the distiller will turn off automatically;
When the water in the tap water container empties and the water level in the boiling
tray falls to the minimum pre-set point, the distiller will shut off automatically;
In case a power outage occurs, the distiller will need to be manually reset to continue
operation when energy is restored. To reset the distiller, press “OFF” on the “OFF/ON-
Reset” switch, wait for about 3 seconds until the red LED turns off, then, press “ON-
Reset”.
Note:
In case the “OFF/ON-Reset” switch is returned to “ON-Reset” before the red LED
turns off, the distiller will not work.
WHEN THE LED FLASHES
- When the LED flashes during operation it is indicating that
scale deposits have formed on the filter, boiling tray and heating element. These parts
should be cleaned with white vinegar or lemon vinegar (see “
Preventive
Maintenance
” (Page 16).
The distiller will also stop working automatically in case the process takes longer than 8
hours. Clean the filter, boiling tray and the heating element as mentioned above.
When continuous cycles are desired push the reset button once to override the 8-hour
time limit.
C R I S T Ó F O L I
D I S T I L L E R
I N S T R U C T I O N M A N U A L
Summary of Contents for Distiller
Page 2: ......
