8
PHYSICAL INSTALLATION
Install the distiller on a flat, leveled and firm surface, at a proper height for the
operator to handle it. Leave enough room next to the distiller for handling and
exchange of the water containers. Install the distiller in a ventilated and clean room,
apart from the place where the patients are treated or people not qualified to
operate the distiller may have easy access to it.
Important!
Install your distiller where it can be easily unplugged. This is the proper
way to turn the equipment off completely.
ELECTRICAL INSTALLATION
The voltage of the distiller is 127V
or
220V, as informed on the identification
label located on the right side of the distiller main unit (Fig.2, page 11 and
Fig.7, page 12). Make sure the wiring
where it will be installed is in
voltage
accordance with the value marked on the Identification Label.
Attention! Non
compliance with this requirement may damage your equipment. Cristófoli
is not responsible for damages caused by inappropriate installations and/or
voltage
.
For the installation, use a three pin outlet, (2P + T, 10A), with grounding pin (Fig.
1, page 9);
Never
use extensions, voltage transformers or any kind of adapters
.
1
2
3
C R I S T Ó F O L I
D I S T I L L E R
I N S T R U C T I O N M A N U A L
INSTALLATION INSTRUCTIONS
Summary of Contents for Distiller
Page 2: ......
