26
Main precaution
Before handling the MPPT, please read carefully this manual.
Precautions regarding electric shocks
Risk of electric shock and danger of death: it’s strictly
forbidden to interfere with the MPPT when under voltage.
Precautions regarding overheating of the appliance
This appliance is designed to be mounted on a vertical wall
or partition as indicated herein.
It is imperative that there be a gap of 150mm around the MPPT.
The installer must ensure that the temperature of the air at the
input is lower than 65°C in extreme operating conditions.
Measures should also be taken to allow for the evacuation of
hot air on either side of the MPPT.
It’s strictly forbidden to put any device on or against the
MPPT.
The MPPT must not be installed near a heat source; it should
be installed in a well-ventilated area. The MPPT
's air inlets and
outlets must not be obstructed.
Attention hot surface: do not touch the MPPT during
and after its operation (burn hazard).
Precautions regarding dust, seepage and falling water
The MPPT should be located so as to prevent penetration
of damp, liquid, salt and dust, any of which could cause
irreparable damage to the equipment and be potentially
hazardous for the user.
The appliance should be installed in a dry and well-ventilated
place.
