TECH SUPPORT: (800) 998-6880
DISCLAIMER
:
Under no circumstances shall the manufacturer or distributor of the PlateCam™ be held liable for
consequential or incidental damages sustained in connection with the use of the PlateCam™ Rear Vision
System. The PlateCam™ is designed as a safety enhancement device and is in no way intended as a
replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when
backing a vehicle. Always check surroundings for safety when backing! Objects on the monitor are
closer than they appear. For the best fit, modification of the vehicle license may or may not be
necessary. It is the sole responsibility of the vehicle owner to check and verify any and all State or
Federal Motor vehicle codes with regards to modifications of vehicle license plates. The manufacturer of
the PlateCam™ assumes no liability or responsibility whatsoever with regards modifications of the
license plate.
www.crimestopper.com
[email protected]
Phone (800) 998-6880
FAX (805) 581-9500
© 2010 Crimestopper Security Products
7-15-2010
SPECIFICATIONS:
1/4 Inch Color CMOS Sensor
Video Output:
1.0 V P-P composite (75 Ohm load)
Dimension (MM):
1"(L) × 7⅞"(W) × 1¼"(D) Supply Voltage:
+12VDC
Weight:
12 Oz.
Power Consumption:
80mA
Pixels:
512 (H) x 492 (V)
Electronic Shutter:
1/50 s – 1/100000s
Resolution:
> 250,000 pixels
White Balance:
Automatic
More than 420 TV lines
Gamma Correction:
0.45
Minimum Illumination:
0 LUX / F 1.2
S/N Ratio:
More than 48dB
Lens Type:
Wide Angle
Operating Temp:
-13 to 185 F (-20 to 75 C)
Horizontal Angle:
180°
Gain Control:
Automatic
Vertical Angle:
90°
Digital Signal Processor w/10 Bit A/D Converter
