INSTALLATION
MOUNTING:
1. The SV-5200.IR and SV-5200.IR.C Rear Vision Systems use a super wide-angle lens for best
all around performance. The Camera will display the full width of most parking spaces up to 8
feet or even wider.
2. These cameras are designed to work best on vehicles that have a license plate located at the
center and above the rear bumper. If your vehicle has a plate location that is offset to the left
side, right side, or your plate is located under the bumper then the PlateCam™ may not
provide optimum performance.
3. The SV-5200.IR and SV-5200.IR.C are designed to use the existing License Plate mounting
equipment
SIDE
VIEW
License Plate
Camera Lens
Mounting
Surface
Cable
Factory License
Plate Bolt
NOTE
License Plate Should Not
Be Cut Or Trimmed
CAMERA:
1. The Camera has built-in circuitry to reverse the image so objects on the right of vehicle
appear on the right and objects on the left appear on the left when looking at a standard
monitor. (See Reverse Imaging next section for more information.)
2. The color CMOS camera is maintenance-free, waterproof (IP-68) and vibration resistant.
3. This camera has built-in Infra-Red LEDs for night vision. This will provide the driver with the
absolute best illumination when backing up the vehicle at night time.
4. The camera is completely electronic. There are NO manual adjustments for focus, etc.
